Journal is indexed in following databases:
- SCOPUS
- Web of Science Core Collection - Journal Citation Reports
- EBSCOhost
- Directory of Open Access Journals
- TRID Database - Transportation Research Board
- Index Copernicus Journals Master List
- BazTech
- Google Scholar
2023 Journal Impact Factor - 0.7
2023 CiteScore - 1.4
ISSN 2083-6473
ISSN 2083-6481 (electronic version)
Editor-in-Chief
Associate Editor
Prof. Tomasz Neumann
Published by
TransNav, Faculty of Navigation
Gdynia Maritime University
3, John Paul II Avenue
81-345 Gdynia, POLAND
e-mail transnav@umg.edu.pl
Global and Local Planning of Ship Route Using MATLAB and Simulink
1 Odesa National Maritime University, Odessa, Ukraine
2 Gdynia Maritime University, Gdynia, Poland
2 Gdynia Maritime University, Gdynia, Poland
ABSTRACT: This article considers a new method of decomposing the ship route into global and local planning using MATLAB and Simulink developed by the authors. The authors propose to create a program code in MATLAB and operate it into Simulink. Wherein, the corrective coefficients were written in MATLAB. Such trajectories are constructed as a set of points, collected into the special matrix. In determining of the angle value of the rudder was used the ship’s turning ability such as: high (HG), middle (MD) or low (LW) with regard to passage area. Moreover, in the article were analyzed and calculated the ship rudder effectiveness for Proportional-Integral-Derivative (PID) control. The paper is devoted to the problem of safety navigation. First of all is the task of planning the path: the trajectory of the vessel’s movement in the local water area. The purpose of planning the vessel trajectory in the local water area is to ensure navigation safety due to marine traffic and environmental conditions. One of the tasks of the present work is controlling following a desired trajectory. The article notes affect of the vessel motion deviation into control process.
KEYWORDS: Safety at Sea, Device Control, Global Planning, Local Planning, Marine Autonomous Surface Ship, Scenario Matrix, Path Matrix, Route Matrix
REFERENCES
J. van Amerongen, and H. R. V. Nauta Lemke, “Recent development in automatic steering of ships”. Journal of Navigation, vol. 39, no. 3, pp. 349-362, 1986. - doi:10.1017/S0373463300000825
“COLREGS - International Regulations for Preventing Collisions at Sea”. In: Convention on the International Regulations for Preventing Collisions at Sea, 1972, pp. 1–74.
S. I. Demin, E. I. Zhukov, and N. A. Kubachev, ”Upravlenie sudnom”. Izd. 14. Transport. Moskwa, 1991. (in Russian)
O. M. Faltinsen, Sea loads on ships and offshore structures. Cambridge University Press, 1990. - doi:10.1146/annurev.fl.22.010190.000343
T. I. Fossen, Marine Control Systems: Guidance, Navigation, and Control of Ships, Rigs and Underwater Vehicles. Trondheim, Norway: Marine Cybernetics, 2002.
T. I. Fossen, Handbook of Marine Craft Hydrodynamics and Motion Control. John Wiley & Sons, 2011. - doi:10.1002/9781119994138
J. Galbas, Synthesis of precision ship control systems using thrusters. PhD thesis. Technical University of Gdańsk, 1988. (in Polish)
A. J. Healey, and D. Lienard, “Multivariable sliding mode control for autonomous diving and steering of unmanned underwater vehicles”. IEEE Journal of Oceanic Engineering, vol. 18, no. 3, pp. 327-339, 1993. - doi:10.1109/JOE.1993.236372
IMO. Regulatory Scoping Exercise for the Use of Maritime Autonomous Surface Ships (MASS); MSC 99/WP.9; IMO: London, UK, 2018.
O. Kupraty, “Mathematical modeling trajectory of a ship as a control object in global planning”. Transport development, vol. 1, no. 6, pp. 40-55, 2020. - doi:10.33082/td.2020.1-6.04
O. Kupraty, “Mathematical modeling of the trajectory of a ship as a control object in local planning”. In Proc. MATEC Web of Conferences, vol. 339, 01015, pp. 1-13, 2021. - doi:10.1051/matecconf/202133901015
O. Kupraty, “Implementation of the algorithm for calculation course (bearing) on rhumb line and constructing the trajectory of the ship’s turning circle in the MATLAB programming environment”. The scientific heritage No 60(2021), pp. 40-45, 2021.
O. Kupraty, “Mathematical modelling of construction of ship turning trajectory using autonomous bow thruster work and research of bow thruster control specifics”. Scientific Journal of Gdynia Maritime University, no. 118, pp. 7-23, 2021.
A. Lazarowska, “Trajectory base method for ship’s safe path planning”. Procedia Computer Science, vol. 96, pp. 1022–1031, 2016. - doi:10.1016/j.procs.2016.08.118
A. Shakhov, and O. Kupraty, “Basic project of autonomous main engine control and it implementation in C# (C sharp) environment”. In Proc. IEEE 16th International Conference on Computer Sciences and Information Technologies (CSIT), 2021, pp. 319-322 - doi:10.1109/CSIT52700.2021.9648721
W. Ślączka, and J. Guziewicz, ”Methods of determining the maneuvering area of a ship used in simulation tests”, in International Scientific and Technical Conference on Sea Traffic Engineering, M. Jurdziński, J. Sitarz (Eds.), Szczecin: Wyższa Szkoła Morska, 1997, pp. 125-142. (in Polish).
R. Śmierzchalski, and A. Łebkowski. “Moving objects in the problem of path planning by evolutionary computation”. in Neural Networks and Soft Computing, L. Rutkowski, J. Kacprzyk, Eds. Berlin Heidelberg: Springer-Verlag, 2002, pp. 382-386. - doi:10.1007/978-3-7908-1902-1_57
M. Tomera, Switching-Based Multi-Operational Control of Ship Motion. Warsaw: EXIT, 2018.
G. B. Vilskiy, A. S. Maltsev, V. V. Bezdolny, and E. I. Gonczarov, Navigaczionnaya bezopasnost priloczmanskoj provodke sudov. Odessa-Nikolaev: Feniks, 2007. (in Russian)
E. I. Wieriemiej, Sriednie kwadraticznaja mnogocielewaja optimizacija: uczeb. posobije, SPb, St. Petersburg, 2016. (in Russian)
Citation note:
Kupraty O., Tomera M.: Global and Local Planning of Ship Route Using MATLAB and Simulink. TransNav, the International Journal on Marine Navigation and Safety of Sea Transportation, Vol. 17, No. 1, doi:10.12716/1001.17.01.23, pp. 205-215, 2023
Authors in other databases:
Oleksandr Kupraty:
orcid.org/0000-0003-3519-504X
FjC0jd0AAAAJ